| Features |
 |
PICMG 2.0 CompactPCI Specification
R3.0 Compilant |
 |
|
Standard 19" rack-mount
8U height enclosure for 6U form factor CompactPCI, 40HP(10 slots)
width for boards region |
|
PICMG 2.1 CompactPCI Hot Swap
Specification R2.0 Compilant |
|
|
Drive bays and removable reducdant
power supply are secured by door. |
|
Standard 6U form factor; 2-slot
(8TE/HP) width |
|
|
Three external 5.25"
and one 3.5" drive bays. Suitable for installing RAID
system |
|
Design for Intel® socket-370
®Pentium-III/Celeron CPU running at FSB 66/100/133MHz |
|
|
Hot swappable cooling fans
for board area. |
|
Supports up to socket 370
®Pentium-III at 1.26GHz Tualatin CPU with 512K L2 cache |
|
|
Center-shifted design of bottom
fan for better CPU board cooling. |
|
Three 168 -pin DIMM sockets
support up to 512MB PC-133/PC-100 un-buffered SDRAM |
|
|
Independent cooling fans for
redundant power supply and drive bay |
|
Supports up to 4 USB ports, 4 serial ports,
2 parallel ports |
|
|
Comprehensive EMC shielding |
|
Supports 7 bus-master PCI
devices on CompactPCI bus peripheral slots |
|
|
Installed with Fron-accessed
dual redundant AC power supply. The maximum power can be 300W
or 400W. |
|
On-board high performance
AGP 2x VGA display output with display cache by built-in intel
815E chipset VGA controller (for model CP-6780V/VS series) |
|
|
8-slot backplane with versatile
fron and rear I/O configurations and H.110 bus options |
|
On-board high performance
AGP 2x VGA/LCD display output by SMI SM721 controller (for
model CP-6780TS series) |
|
|
10-layer backplane PCB for
accurate impedance control and electronic noise immunity |
|
Supports up to triple 10/100Mbps
Ethernet ports |
|
|
One system slot in right side
with peripheral slots and one utility board slot. |
|
Supports Ultra-2 Wide SCSI
by LSI SYM53c895 controller |
|
|
48V power connector for H.110
(model depends) |
|
Supports Intel pre-boot execution
environment (PXE) for remote boot |
|
|
Direct connecting design for
IDE and FDD devices wiring on behind of backplane by P3 &
P5 rear I/O with 6U CPU modules |
|
Supports CompactFlash type-II
socket via removable daughter board |
|
|
|
|
Supports rear I/O configuration |
|
|
|
|
Supports remote console |
|
|
|
