| Features |
 |
PICMG 2.0 CompactPCI Specification
R3.0 Compilant |
 |
 |
Supports Intel pre-boot execution
environment (PXE) for remote boot |
 |
PICMG 2.1 CompactPCI Hot Swap
Specification R2.0 Compilant |
 |
 |
Supports CompactFlash type-II
socket via removable daughter board |
 |
Standard 6U form factor, 2-slot
(8TE/HP) width |
 |
 |
Supports rear I/O configuration |
 |
Design for Intel® socket-370
®Pentium-III/Celeron CPU running at FSB 66/100/133MHz |
 |
 |
Supports remote console |
 |
Supports up to Intel®
socket-370 ®Pentium-III 1.26GHz Tualatin CPU with 512KL2
cache |
 |
 |
19-inche rack-mounted or benchtop
design, 4U height for 6U CompactPCI boards |
 |
Three 168 -pin DIMM sockets
support up to 512MB PC-133/PC-100 un-buffered SDRAM |
 |
 |
Two removable 3.5" ATA-100HDD
racks or SCSI-3 HDD racks |
 |
Build-in housing for 2.5"
low profile HDD |
 |
 |
Built-in slim type CD-ROM
and slim type 3.5" Floppy disk drive (model dependent) |
 |
Supports up to 4 USB ports,
4 serial ports, 2 parallel ports |
 |
 |
Chassis monitoring alarm module
for monitoring system temperature and cooling fan status |
 |
Supports 7 bus-master PCI
devices on CompactPCI bus peripheral slots |
 |
 |
Equipped with industrial grade
280W ATX power supply. |
 |
On-board high performance
AGP 2x VGA display output with display cache by built-in intel
815E chipset VGA controller (for model CP-6780V/VS series) |
 |
 |
Two hot swappable cooling
fans for boards, provides non-blocked verification for high
efficient cooling |
 |
On-board high performance
AGP 2x VGA/LCD display output by SMI SM721 controller (for
model CP-6780TS series) |
 |
 |
Three fans for drive bays
cooling, those fans are hot swappable from rear side |
 |
Supports up to triple 10/100Mbps
Ethernet ports |
 |
 |
Provides one system and 4
peripheral I/O slots with 64-bit/66MHz cPCI but, 32bit cPCI
bus is also available |
 |
Supports Ultra-2 Wide SCSI
by LSI SYM53c895 controller |
 |
 |
System slot supports P3, P4, P5 rear I/O,
supports max 8TE/HP (dual-space) width CPU board. |
 |
Peripheral slots support H.110 CTI bus
and rear I/O on P3, P5 |
|
|
|