 |
| PS-MPD-8071 Series |
| Industrial Compact Size Power Supply |
| Introductions: |
|
The MPD-8071 is a 72 watts triple output switching power supply specially designed for microprocessor based applications. it's DC input from 10V to 30V, and enclose typel. |
| Input Specifications: |
|
Input Voltage : This power supply can operate continuously from +10VDC to +30V DC, normal line is +24VDC. |
| Input Current : The maximum input current is 3A at 10VDC. |
|
Inrush Current : The maximum inrush current will net exceed 15A at 10VDC input from a cold start, with exclusion of EMI capacitors. |
| Output Specifications: |
|
Load Range : At factory, all outputs in 60% rated load conditions, the +5V output is set to between 5.00V and 5.10V, and the other outputs are checked to be within the specified voltage accuracy range. It could stand 10 secretary at peak load 25°C. |
|
||||||||||||||||||||||||||||||
| Ripple and Noise : The peak to peak ripple and noise for +5V is less than 50mV, for the other are less than 100mV. Measuring is done by 15MHz band width limited oscilloscope and terminated eadh output with a 0.47uF capacitor at rated loading , norminal line. |
| Line Regulation : The line regulation for each outputs is less than +/- 2% while measuring at rated loading and +/- 10% of input +12V and +24V changing. |
| Load Regulation : The load regulation for +5V is less than +/-3%, for +12V, -12V are less than 5%, measuring isdonw by changing the measured output loading +/-40% from 60% rated load, and keep other output is at 60% rated load. |
| General Fatures: |
| Efficiency : The efficiency is higher than 70% while measuring at DC24V and raged load. |
| Protection : For some reason the power supply fails to control itself, the build in over voltage protection circuit will shutdown the outputs to prevent damage to external circuits. The trip point of crowbar circuit is around 5.7V to 7.0V. The power supply will go into hiccup mode against short circuit or over load conditions, and will autorecovery while fault conditions moved. The O.C.P. Of +5V is 20Z max. |
| International Standards: |
| Safety : UL 1950, CSA 22.2 No. 234, VDE EN 60950 |
|
EMI : FCC docket 20780 curve B, EN 55022B. |
|
EMS : Level 3 Of IEC-801-2, 801-3, 801-4. |
| Mechanical Specification: |
|
Connectors
: TB1--DC input : Terminal block. |
| Dimensions |
|